HOW IT WORKS

Hand holding brush applicator, A step by step guide

① Cut the refill at the mark

② Fill the brush

③ Get started! Distribute powder with the brush on the parting and hairline. The rule is: The harder you brush, the more powder ends up in your hair.

④ Repeat if necessary - anytime and anywhere!

🎥 Watch the instructional video!

The biggest challenges:

Too much powder, too quickly empty?

Unscrew the brush and check if the filter (a small black sponge) is still stuck on the underside. If you see six holes instead, the filter has slipped into the container. Just take it out with tweezers and reinsert it. Problem solved!

The lid won't close?

Push the neck of the brush upwards. This allows the bristles to retract easily. If it's difficult, gently turn the neck to the right until it clicks. Now you can easily slide it up and down. The notches on the middle part ensure that the brush does not unintentionally extend or retract.

The powder is hard to fill?

If powder spills, use a funnel for a clean filling. Tip for next time: In the right corner of the back, you will find a marking. Cut the refill there – this keeps the opening small enough to fill the powder easily.

🎥 Watch the troubleshooting video!

Any questions about the application? Write to us!